Hello, my name is Kenny Keller and I am member of the MXD Process sales team. Today we're going to go over how to mount the Heavy Duty Clamp Mount Mixer.
To mount the Heavy Duty Clamp Mount Mixer we will start by attaching the clamp mount assembly to the clamp mount mixer.
First, remove the bolt on the aluminum flange piece from the back of the assembly, make sure to leave the rubber washer on the assembly.
Then, insert the threads in the ball joint and fit the flange piece over the threads.
Once that is set, put the bolt back on and hand tighten only.
Once the mount is attached to the mixer you can then set the mixer onto the bracket or tank. After the mixer has been set, tighten the clamp by hand.
Now that the clamp has been set make sure the ball joint is semi loose, this will allow you to swivel the mixer to a desired orientation for mixing.
Once in the desired position, tighten the ball joint with a wrench to make sure there is no movement during mixing.